Industry News
-
Leveling Feet for Testing Equipment: Why They Matter
Testing and inspection equipment differs from processing equipment in one fundamental way: a machine tool generates errors as it cuts, while a coordinate measuring machine, vision system, or tensile tester generates almost no error itself — but it is extremely sensitive to errors coming from outs...Read more -
Leveling Caster Selection: Six Parameters That Must Match
Leveling casters are composite parts: they combine a swivel caster with an adjustable screw and floor base, so that one unit can both move equipment and level it in place. Because the parameter list is one layer longer than an ordinary caster’s, missing a single specification can mean the u...Read more -
High-Temperature AGV Casters: Selection and Maintenance Guide
The effect of high temperature on AGV casters is gradual: the hotter the environment, the more failure modes appear, and the bigger the difference in the right solution. Between an ordinary workshop at 40°C and a foundry floor above 150°C, the choice of tread material, bearing, grease, and bracke...Read more -
AGV Caster Replacement: Replace the Wheel or the Whole Caster?
When AGV casters wear to the point where replacement becomes unavoidable, maintenance engineers face a recurring question: should you replace just the wheel, or the entire caster? The answer has little to do with which option is cheaper and everything to do with the caster’s structural type...Read more -
Single-Brake vs Dual-Brake Casters: Safety Guide
Caster braking system, usually inconspicuous, but in heavy-load transport, slope operation, equipment positioning these scenarios, braking reliability directly relates to safety. When selecting casters in workshops, single-brake and dual-brake are two common braking configurations, and their stru...Read more -
Why Do AGV Casters Use Polyurethane? Material Analysis
When AGV whole machine factories do wheel selection, the proportion finally landing on polyurethane tread is not low. Looking only at unit price, polyurethane wheels are indeed a bit more expensive than ordinary rubber wheels and nylon wheels; but AGV requirements for tread are not the same magni...Read more -
How to Select Caster Bearings? Ball Bearing vs Sealed Guide
Bearings determine whether casters push labor-saving, how long used, how loud noise. But caster bearing selection, many people only focus on “whether is bearing”, don’t look at differences in rolling method and protection method, result spent money, problem not solved. Caster be...Read more -
Manganese Steel vs Ordinary Steel Casters: Which Is Better?
Manganese steel casters more expensive than ordinary steel casters, is it worth it after all — this is a question often asked by heavy-load working condition users. Those asking this question, mostly have been disappointed by cheap wheels, and afraid of spending extra money for nothing. Explain t...Read more -
PU vs TPU Caster Wheels: Complete Difference Guide
PU and TPU, names both carry “polyurethane,” and many purchasers think they are one thing. Actually the two’s material system, craft, performance, price, and applicable scenarios all differ, and confusing them during selection easily causes problems. Material Difference: Cast PU...Read more -
What Is 8-Level Powder Coating? Corrosion Protection Guide
The words “8-level powder coating” — people hearing it for the first time mostly mutter: isn’t this another marketing gimmick? Are the grade numbers made up casually? It’s normal to have this doubt — statements about corrosion protection grades are indeed mixed on the mark...Read more -
How to Calculate Caster Load Capacity? Dynamic vs Static Load
Selecting casters starts with calculating load capacity — this is the first step of procurement. If calculated wrong, wheels being scrapped early is the light consequence; wheel failure during handling causing tipping over affects both equipment and personnel safety. But load capacity is not as s...Read more -
10 Core Parameters for Industrial Caster Selection | Complete Guide
That string of parameters on a caster purchase order — wheel diameter, load capacity, wheel width, mounting height, hole spacing, material, hardness, bearing, brake, swivel — looks like hieroglyphics. These parameters do not exist independently; there are logical relationships between them. Under...Read more