Notes on the installation and use of the universal wheel

Notes on the installation of the universal wheel

1、Correctly and reliably install the universal wheel in the designed position.
2、The wheel axle must be at a perpendicular angle to the ground, so as not to increase the pressure when the wheel is used.
3, the quality of the caster bracket must be guaranteed, must meet the pre-designed rated load standard, so as to avoid the later use of the process of overweight, affecting the life of the wheel.
4, the function of the universal wheel can not be changed, also not affected by the installation device.
5, according to the use of different purposes, the wheel will also have universal casters and fixed casters mixed and matched with the use, then we must make a reasonable configuration according to the prior design; so as not to be unable to use.
6, the installation must be installed manufacturers to plan the location and number of installation; so as not to repeat the unnecessary waste.
7, if the casters are used in the following areas: outdoor, coastal areas, corrosive or harsh conditions of use in the region, special products must be specified

Notes on the use of universal casters

1、The casters must be installed in the position specified by the manufacturer.
2、The mounted caster bracket must be strong enough to meet the load capacity when used.
3、The function of the casters must not be changed or affected by the mounting device.
4. The axle of the transit wheel must always be vertical.
5、Fixed casters must be in a straight line with their axles.
6, if all only use swivel casters, they must be consistent.
7, If fixed casters are used in conjunction with swivel casters, all casters must be compatible with each other and must be recommended by the manufacturer.