Abokai waɗanda suka yi amfani da na'urorin caster kowa ya san cewa duk nau'ikan na'urorin caster na masana'antu ana yi musu magani a saman surface; ko naku na'urar caster ce mai ƙarfi ko kuma na'urar caster ta duniya, me yasa ake yin maganin saman surface na bracket? Wannan ya faru ne musamman saboda an yi stent ɗin ƙarfe ko ƙarfe, kuma a cikin amfaninmu na yau da kullun, saboda ƙarfe ko ƙarfe ana iya sa shi cikin sauƙi tare da iskar oxygen don haka yana sa dukkan stent ɗin ya yi tsatsa, yana shafar saman da amfani na yau da kullun, shi ya sa masana'antun caster da yawa dole ne su yi amfani da na'urorin caster bayan an yi amfani da na'urar. Ga wasu hanyoyi na yau da kullun na magance saman surface da halayensu.
Electroplating: Electroplating yana faruwa ne ta hanyar electrolysis, ions na ƙarfe da aka ajiye a saman aikin don samar da wani Layer na fim ɗin ƙarfe. Electroplating na iya yin saman caster ɗin da haske na ƙarfe, inganta juriyar lalacewa da tsawaita rayuwar sabis. Ana iya daidaita launi da kauri na Layer ɗin plating bisa ga buƙatun abokin ciniki.
2. Anodizing: Anodizing wani nau'in maganin lantarki ne, wanda ke sa saman ƙarfe ya zama mai jure tsatsa da kuma jure gogewa ta hanyar samar da fim ɗin oxide a saman aluminum, magnesium, zinc da sauran ƙarfe. Maganin saman anodic oxidation yana da kyakkyawan aikin hana karce, kuma a lokaci guda, launin yana da kyau kuma yana da kyau.
3. Feshin fenti: Feshin fenti shine feshin fenti a saman kayan aikin ta amfani da bindigar feshi don samar da wani Layer na fim mai kariya. Feshin fenti na iya sa masu simintin su sami launuka da laushi daban-daban don haɓaka kyawun samfurin. Maganin feshin fenti yana da kyakkyawan mannewa da juriya ga lalacewa, amma akwai yiwuwar akwai saman da bai daidaita ba.
4. Galvanizing: Galvanizing shine adana ions na zinc a saman aikin don samar da siririn fim na zinc gami ta hanyar electrolysis. Zane na zinc na iya inganta tsatsa da juriyar lalacewa na saman caster kuma ya tsawaita rayuwar sabis. Launin Layer ɗin galvanized yawanci fari ne, wanda ke da ɗanɗanon kyau.
5. Feshin filastik: Ana amfani da maganin feshin filastik ta hanyar iska mai matsewa don samar da iska mai ƙarfi, za a ɗora shi a cikin akwati na foda zuwa bakin bindigar feshi, a gaban bakin bindigar feshi na ƙarfin lantarki mai ƙarfi, samuwar filin lantarki. Foda mai rufewa bayan filin lantarki da kanta zai kuma ɗauki cajin lantarki, a ƙarƙashin aikin ƙarfin lantarki, foda mai caji zai jawo hankalin kayan aikin polarity daban, don haka foda za a iya matse shi sosai a saman aikin. Ingancin murfin da aka yi ta feshin filastik yana da kyau sosai, kuma yanayin bayyanar zai iya kaiwa har zuwa mataki na 9, kuma aikin hana lalata zai fi kyau. Masu jefa ƙarfe na Zhuo Ye manganese tare da wannan maganin.
Abubuwan da ke sama sune hanyoyin da aka saba amfani da su wajen gyaran saman injinan gyaran ...
Lokacin Saƙo: Disamba-15-2023